More Detailed Info and Thoughts about Horizontal V/UHF Antennas

 Antennas are by far the most important part of your weak-signal V/UHF station.   If you are gaga for the latest gee-whiz rig and you attach a $5 antenna to it, you have a $5 station, in my opinion.  In fact, you are far better off figuring out what is the most antenna you can safely put up, then worrying about what rig to buy.  Most don’t do it that way, but then again, the crowd is often wrong. 
   I realize many guys are antenna-restricted and have to do the best they can with what they have.  No shame there.  You can still enjoy V/UHF, just realize that you’re not going to have maximum range.   I would also encourage V/UHF’ers who are antenna restricted or have lousy QTH’s to consider becoming a rover or hilltopper.  Take your rigs and antennas to high spots you can really get out from.  We have a lot of great rovers in the Midwest, and boy do we appreciate them going to grids we might not otherwise be able to work. 

   For those who just cannot bring themselves to spend $100, 200, 400 on a quality yagi with lots of gain and a great pattern, here’s a link to homebrew V/UHF yagis that work fairly well.  They’re not powerhouses, but they can be a fun project for your club or your group of buddies that are V/UHF curious.  Using these WA5VJB Cheap Yagis (horizontally polarized) will be light years better than the vertical you’re used to on the FM side.  
   Link to WA5VJB Cheap Yagis:

   I have a few other posts on this blog about antennas.  If you have a hard time falling asleep, print them out and take them to bed with you.  Guarantee you’ll drift off peacefully… 🙂   You might even be motivated to improve your station, if you take the advice to heart. 
   Try this post: 
   And this one:

   Hope it helps.  As with anything on this website, feel free to pass the info along to other hams.

Comments are closed.