KC9BQA For Sale List — Towers, Yagis, Coax and Rotors

7:45am Thur.  (Jan. 7, 2016)

The first phase of selling my station has been great.  Virtually all my rigs, amps and transverters are gone to good homes.    If you are wondering why I’m selling, see posts at kc9bqa.com dated March 15th, 2014.

I have been helping VHF/UHF for 8 years now.  I ask that you help me by spreading the word about my gear for sale.  Spread the word far and wide.  Not everyone follows kc9bqa.com, so help me get the word out.

From my 28-2304 MHz station, all that remains is a single Icom IC-575H, mated to a Heathkit SB-230.   The price is $500.  This is basically buying the 575-H and getting the amp thrown in for free.  I am very reluctant to ship rigs, so the 575-H and SB-230 will end up going to someone within a several hour drive.  I am definitely willing to drive up to 150-200 miles to bridge the gap.  I did this multiple times with the rigs I sold already.
I also have a few other rigs that need repair so they aren’t ready to sell at this time.  (A pair of Kenwood TS-850’s and an Icom IC-475H).

THE SECOND PHASE is primarily towers, yagis for 50 thru 2304 MHz, plenty of feedline, tower accessories, plus rotors and control boxes.
WHAT EXACTLY IS STILL IN THE AIR??

I have two towers — one is 100′ and the other is 70′.  ( I suppose HF’ers might be interested in these towers, too)  Both  towers are Rohn SSV and self-supporting.  No guy wires needed.   The 100′ tower has a wide, robust base and the 70’er is more of a straight stick.
Antennas on the towers are:
28 MHz:  5-element HyGain (bought new and installed June 2011)
144:  Pair 12 el K1FO design
222:  Pair 16 el K1FO
432:  Pair 25 el K1FO
The 144, 222 and 432 yagi pairs were bought new from C3i back in late 2003.
There is a very sturdy custom H-frame that holds the 222 and 432 yagis in perfect balance.

902:  Pair 33 el K1WHS (DirectiveSystems.com)
1296:  Pair 45 el K1WHS
2304:  Single 76 el “blowtorch”
These yagis were bought new and installed in the summer of 2005.
There is also a nice H-frame from Directive Systems that holds and balances the 902/1296 yagis.

All phasing harnesses, power dividers and H-frames are part of the deal, along with two very stout mastpipes in the 15-20′ range.
Besides the towers and yagis, there’s hundreds of feet of coax on those towers.  Rough guess is 400-500′ of 1″ hardline (in 4 separate runs), 250-300′ of 1.5″ hardline (in 4 separate runs) and several hundred feet of 9913.   I also have a spare piece of 1 1/2″ hardline in the shed, guess-timating about 60-70′.   All feedline is also included in the prices below.

SO WHAT’S THIS ALL GOING TO COST, TODD?
The price for both towers, all yagis, all feedlines, phasing harnesses, power dividers, H-frames and 2 very sturdy long mast pipes is $6000.   Someone who can take them down safely would get a credit of $1000.  Someone who bought everything at one time would get another $500 credit.  This means the soup-to-nuts price is $4500.  If I know you to be a dedicated VHF’er, I will gladly knock another $500 off because in a perfect world, this all goes to a good home.  If you are a pleasure to deal with, that’s worth another $500 to me.  :)  So now we’re down to $3500 for 2 self-supporting towers, good long yagis for 28, 144, 222, 432, 902, 1296 and 2304 MHz (stacked pairs on 144 thru 1296, by the way) and individual feedline for each band — at least 8 separate runs of 1 to 1.5″ hardline.
If this sounds like something you want, email me, we can exchange phone #’s and find a time when you can visit and inspect everything for yourself.   My everyday email is good at qrz.com.  I also use wi.todd (at) yahoo.com, but I don’t think to check it very often.
Here’s more info …
I should add that there’s no real deadline to the tower takedown.   If it takes a few years, I’m OK.    BUT… if someone has serious interest we should talk.    A guy could have everything this spring (of 2016) summer  if he’s ready to move.

I gratefully acknowledge 5 hams (so far) who have offered to do some tower work in exchange for some of the items up in the air.   The tricky part is figuring out the timing and details.   This may take some time.   How quickly the towers/yagis/rotors and feedline come down will be determined by how motivated a buyer is.  And how well they can streamline the process.   A single buyer (or crew) who can do it all will save the most money.

Rotors will be a separate deal, as will the control boxes.  I’m not quite ready to inventory and price those yet.  Plus they have to come off the tower and I won’t sell them until I’m sure they are working 100%.  I will have a pair of Prosistel PST-61D’s, plus a pair of CATS RD 1800’s, and an old Ham IV that I bought in 2002 from W9NAW and never used.  There’s 3 control boxes — a Green Heron RT-21 and a pair of CATS DPU 1800-D’s.  Just found a Yaesu G-800 rotor and a pair of G-800 SDX control boxes in a corner.  Not sure if those Yaesu pieces are working or not.   I retired those about 2006-7 and upgraded.

 

 

Comments are closed.